Featured Products Rustins Quick Dry ASAP (All Surface All Purpose) Paint Water-based paint that dries to a satin finish It resists flaking or peeling because of its flexible capabilities. Can be used indoors and outdoors on multiple surfaces. It is touch dry in 30 minutes and re-coating time is approximately 2-3 hours.  ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine. Owatrol Oil Colourless, penetrating rust inhibitor & oil-based paint additive Owatrol Oil is a versatile, highly penetrating air drying oil that can be used alone or added to paint. Used alone as a rust inhibitor it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust dead in its tracks. Used alone on porous wood surfaces it will saturate and protect the wood from damage caused by moisture and prevent paint from peeling. When added as a paint conditioner to any oil or alkyd based coatings and it will give increased wet edge time, improved flow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times allowing you to achieve a more professional finish. ESP Easy Surface Prep Bonds paint and varnish to all shiny and smooth surfaces Easy Surface Prep (ESP) is a wipe on/wipe off product which primes and prepares any shiny surface for painting. It completely eliminates the need for difficult and time-consuming sanding and leaves the surface ready for paint or varnish to bond to. It is a safe and effective way to prepare any non-porous surface for painting and is ideal for use on ceramic tiles and melamine units. It is colourless, virtually odourless and can be wiped on and off with a lint-free cloth making it incredibly easy to use! E-B (Emulsa-Bond) Water-based mix-in bonding primer and first coat of paint in one E-B is a mix in bonding primer which can be added to the first coat of any water based paint or varnish. It provides a stabilising primer and first coat of paint in the same application while maximising adhesion between the first coat and the finish coat. E-B is especially suitable for unstable, chalky and powdery surfaces. Floetrol Water-based paint conditioner to eliminate brush and roller marks Floetrol is a water-based paint conditioner which makes interior and exterior emulsion and acrylic paints including coloured wood stains work more like oil-based paints. It helps to improve paint flow and workability and allows the paint to adjust to more difficult conditions such as hot, cold and windy environments. Arguably most importantly, it helps to eliminate brush and roller marks by improving the flow of the paint giving a much more professional finish and helping you to make progress more quickly.